Oscilloscope support
Connect scopes from leading test vendors.
Current support is shown from the implemented Oscinex driver routes. Dedicated driver presence is distinguished from generic fallback and from model-family hardware validation.
| Vendor | Supported families / route | Interface | Driver | Current state |
|---|---|---|---|---|
| Rigol | Rigol SCPI oscilloscopes identified by *IDN?; dedicated driver route. Previously listed families: DS1000Z, DS2000A, MSO5000. | SCPI | RigolDriver | Dedicated driver |
| Siglent | Siglent SCPI oscilloscopes using the implemented :WAV:/:ACQ:MDEP command family. Previously listed: SDS1000X-E, SDS2000X Plus. | SCPI | SiglentDriver | Dedicated driver |
| Keysight / Agilent / HP | Keysight, Agilent and Hewlett-Packard instruments identified by *IDN? and routed to the Keysight driver. Previously listed: InfiniiVision 1000–6000. | SCPI | KeysightDriver | Dedicated driver |
| Tektronix | Tektronix SCPI oscilloscopes identified by *IDN?. Previously listed: TBS1000C, TBS2000B, MDO3000. | SCPI | TektronixDriver | Dedicated driver |
| Rohde & Schwarz | R&S scopes are detected and routed to a dedicated driver, but waveform scaling is explicitly not implemented for the model family in the supplied driver. | SCPI | RohdeSchwarzDriver | Driver incomplete |
| Hantek | Hantek instruments identified by *IDN?; no dedicated Hantek driver is present in the supplied source. | SCPI / model dependent | GenericWavDriver | Generic route |
| GW Instek | GW / Instek instruments identified by *IDN?; routed through the generic waveform implementation. | SCPI / model dependent | GenericWavDriver | Generic route |
| OWON | OWON instruments identified by *IDN?; routed through the generic waveform implementation. | SCPI / model dependent | GenericWavDriver | Generic route |
| PicoScope | SDK families supported by the adapter contract: ps2000a, ps3000a, ps4000a, ps5000a, ps6000a and psospa families. Concrete family provider required. | PicoSDK | PicoScopeDriver + PicoSdkApi | Native SDK support |
| Other SCPI scopes | Unrecognised instruments can fall back to the generic waveform driver; actual compatibility depends on the instrument's waveform command set. | SCPI / model dependent | GenericWavDriver | Fallback route |
Vendor-aware SCPI
Rigol, Siglent, Keysight/Agilent/HP, Tektronix and Rohde & Schwarz are routed to dedicated drivers after instrument identification.
PicoSDK path
PicoScope uses a native SDK adapter rather than SCPI, including block capture, timebase selection and ADC scaling.
Generic fallback
Hantek, GW Instek, OWON and otherwise unrecognised SCPI instruments can use the generic waveform driver where their command set is compatible.